Description
- IP51
- VERSATILITY AND POWERFUL PERFORMANCE IN A LIGHTWEIGHT (8.5 LBS.) INSTRUMENT
- CONSTANT AC OR HALF WAVE RECTIFIED (DC) FIELDS WITH THE FLIP OF A SWITCH FOR THE LOCATION OF SURFACE AND SOME SUB-SURFACE DEFECTS
- APPLY CONTINUOUS FIELDS AND DEMAGNETIZE TOO
- USE WITH DRY POWDER, WET FLUORESCENT OR VISIBLE
- HIGH IMPACT MOLDED HOUSING
- ONE YEAR REPAIR/REPLACEMENT GUARANTEE
- OPTIONAL Y-400 YOKE LIGHT WHERE SHOWN IS AVAILABLE AT ADDITIONAL COST.
- 230VAC MODEL AVAILABLE WITH CE CERTIFICATION AT AN ADDITIONAL COST
The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferrous-magnetic materials.
The selective AC and DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense Half Wave Rectified (DC) field for detection of some subsurface defects.
Controls and solid-state electronics are contained within the high impact molded housing. Articulating legs allow the AC or DC field to be applied to the precise area of inspection on nearly any part of the surface shape… in the lab, factory or field site.
All Parker Contour Probes comply with the requirements of applicable specifications.
SPECIFICATIONS
Unit |
DA-400 |
DA-400S |
A-410 |
A-410S |
Physical |
10 H × 8 L × 2.25 W |
|||
Line Voltage Single Phase | 115 VAC 60 Hz |
230 VAC 50/60 Hz |
115 VAC 60 Hz |
230 VAC 50/60 Hz |
Line Current | 6 A | 3 A | 6 A | 3 A |
Duty Cycle |
50% |
|||
Weight | 8.5 lbs (3.8 kg) | |||
Construction |
Glass-filled nylon housing |
|||
Span |
12 in. (305 mm) across poles |
|||
Field | AC/DC | AC/DC | AC | AC |