FLUXO 215

Inspection : The part is subjected to an intense magnetic flux, which is deviated by the presence of a
defect. This escape attracts the particles of the product and the defects now are clearly
visible as fluorescent lines.
Use : This Magnetic particle examination is used for the detection of emerging defects in all
ferromagnetic materials.
Applicability: Aeronautics, Automobile, Railway, etc…
Concentration : FLUXO 215 is used with water as carrier medium.
The concentrate must be diluted to 2% per litre of water of hardness lower than 30°F.
Composition : FLUXO 215 : Black magnetic powder, wetting agent, defoamer, strong rust inhibitor.
Specifications :
NF EN ISO 9934-2

ASTM E1444-01- Section 5.8

ASME Boiler & Pressure Vessel Code, SECTION V, 2004 Ed
Characteristics : FLUXO 215 is in conformity with the international standard ISO 9934-2 concerning
magnetic particle inspection products, in particular on the following points:
 Performance: 70mm in reference block type 2
 Aspect & colour: black suspension
 Temperature resistance: stable
 Corrosion test: level 0 (according standard ISO 9934-2)
 Mechanic stability : stable product
 Stability in time: minimum 18 months
 Settlement Rate (1 hour) : 1,2 to 2,4 ml /100 ml
Performance test : In order to test the evolution of the performances of detection of the FLUXO 215 in time,
you can proceed with the reference block type 2, according to the method described in the
standard ISO 9934-2 (standard part reference 2).
The length of signature has to be compared with the value measured on the new product; it
should not be lower than 25 mm for the two right and left sides.
Health & Safety : NON DANGEROUS Product – please refer to MSDS.
Packaging : Available in drum of 200g (for 10L of water) and 10kg
Storage : Do not stock in freeze