FLUXO 307

Inspection : The part is subjected to an intense magnetic flux, which is deviated by the presence of a
defect. This escape attracts the particles of the product and the defects now are clearly
visible as fluorescent lines.
Use : This Magnetic particle examination is used for the detection of emerging defects in all
ferromagnetic materials.
Applicability: Aeronautics, Automobile, Railway, etc…
Concentration : FLUXO 307 is used with water as carrier medium.
The concentrate must be diluted to 2% per litre of water of hardness lower than 30°F.
Composition : FLUXO 307: Fluorescent magnetic powder, wetting agent, defoamer, strong rust inhibitor.
Specifications :
NF EN ISO 9934-2

ASTM E1444-01- Section 5.8

ASME Boiler & Pressure Vessel Code, SECTION V, 2004 Ed
Characteristics : FLUXO 307 is in conformity with the international standard ISO 9934-2 concerning
magnetic particle inspection products, in particular on the following points:
 Performance: 70mm in reference block type 2
 Aspect & colour: green suspension
 Particles size: D50% between 3 and 7 μm
D10%>1,5 μm – D90%<40 μm
 Temperature resistance: stable
 Fluorescence coefficient: ß ≈ 3,8 cd.W-1
 Corrosion test: level 0 (according standard ISO 9934-2)
 Mechanic stability : stable product
 Stability in time: minimum 18 months
 Particule content: 0.38 g.L-1
 action reinforced into anti-corrosive and antifoaming agents
Performance test : In order to test the evolution of the performances of detection of the FLUXO 307 in time,
you can proceed with the reference block type 2, according to the method described in the
standard ISO 9934-2 (standard part reference 2).
The length of signature has to be compared with the value measured on the new product; it
should not be lower than 25 mm for the two right and left sides.ealth & Safety : NON DANGEROUS Product – please refer to MSDS.
Packaging : Available in drum of 1 kg (for 50L of water) and 10kg
Storage : Do not stock in freeze
Validity : 18 months after manufacturing (the date is noted on the packaging).
Advices : Shake the can before using.
Use protective paste K300 to avoid any risk of dermatitis.
Discharge : Do not discharge the concentrate.