Two measuring techniques are used to
measure the thickness of layers over a metal
Firstly, the magnetic induction, that is, when
the substrate is self-magnetizable (steel
or iron), and, secondly, the eddy current
method, that is, when the substrate is at least
electrically conductive (other metals such
as aluminum). We specialize in those two
techniques, and we are sorry to say, we
are unable to offer you equipment for the
thickness measurement of ceramics, glass
You will find a variety of probes to suit your
specific requirements. Please note: The
combined oscillating probe is designed for
using both measuring techniques. You can
work with both methods on all metals, with
automatic detection of the substrate. The
90° pivotable probe allows you to measure
even in the most difficult-to-reach corners
and openings. All our coating thickness
gauges are “Made in Germany“.
You can connect many specialized probes to
the List-Magnetik MEGA-CHECK DX coating
Applications on particularly small openings,
on thick coatings and on small measuring
points are thus easily possible. Special
functions such as scan measurement for
rough surfaces and duplex measurement for
galvanized and additionally coated steel round
off the performance spectrum.
A completely newly developed probe technology allows very stable measurements due to
its high sampling rate. For absolutely interference-free and precise measurement, the
signals are already digitized in the probe.
This results in very accurate, reproducible
At List-Magnetik you will find a wide range
of probes for FE metals (iron and steel) and
NFE metals (non-ferrous metals such as aluminum, brass, copper, bronze and non-magnetic
stainless steel) as well as combined probes
with automatic detection of the base material.
The magnetic induction method allows
measurements of paint, varnish, plastic,
rubber, ceramics, zinc plating and galvanic
coatings on steel. The eddy current method
allows you to measure insulating coatings
(paint, lacquer, plastic, anodizing) on nonferrous metals.
The coating thickness gauge has a graphical
LCD touch panel with an innovative operator
guidance and a resolution of 320×480 pixels.
The menu guidance is in German and English,
further language packages can be installed.
The blue silicone frame effectively protects the
housing from damage.
With the flexibly divisible measured value
memory, the freely definable calibration
memories and the Bluetooth Low Energy
interface to Windows, Android or iOS, you
have all the possibilities to record and further
process your measured values.
The scan function allows you to scan a workpiece over a rough surface
and statistically evaluate the data. With the additional analog display,
the visualization of the measured values is supplemented to recognize
trends and peak values even from the corner of your eye.
The duplex function simultaneously records the single layer thickness
when measuring insulating layers on galvanized steel parts.
Power can be supplied by 3 AA batteries or an external source connected
via USB. Thus, you can operate the device with a power bank or on the
The probe cable, which can be plugged in at both ends, connects the
display unit and probe and can be replaced effortlessly if the cable
All List-Magnetik MEGA-CHECK coating thickness gauges are highquality products “Made in Germany”