Setup, Inspection, and Analysis Software Solutions
Compatible with OmniScan MX2 and SX flaw detector data, these software solutions assist users with setup configuration, automated data analysis, or post-inspection PC-based analysis and reporting.
Phased Array Ultrasonic Testing (PAUT) Beam Simulation Software
Visualize beam simulations and prepare effective inspection setups in advance using NDT SetupBuilder software. You can make sure that your OmniScan MX2 or SX flaw detector has all the tools you need when you head to the job site.
Automated Analysis of Weld Inspection Data
To accelerate and standardize the analysis of your weld inspection data, algorithms of the Automated Detection Technology™ (ADT) software from VeriPhase® process encoded phased array data for you. ADT processed data can be exported to OmniPC 4 software for further analysis and reporting.
Perform OmniScan MX2 and SX Data Analysis on a PC
Analyze UT, PA, and TOFD inspection data and generate reports using OmniPC 4 software. Using the PC-based software enables you to deploy the flaw detector back in the field while the analysis is performed. OmniPC 4 software features the same practical analysis tools and intuitive menus of the onboard OmniScan MX2 and SX software.
VeriPhase ADT software
Automated Detection Technology™ software from VeriPhase® works with OmniScan® flaw detectors to quickly process encoded phased array weld data. Once the data is processed, a prepopulated indication table is sent directly to OmniPC™ software with all relevant position and sizing readings to assist you in your analysis. | |
Combining Automated Detection Technology (ADT) software and OmniScan flaw detectors:
|
Detailed ReportingWhether you’re using the software during primary inspection or post-inspection review, it provides you valuable information in a clear, concise format. The detailed quality report helps you to validate your setup parameters, spot data quality issues, and separate listings of populated indications by group.
Learn more about Automated Detection Technology™ software from VeriPhase® here: veriphase.net |
NDT SetupBuilder
NDT SetupBuilder design software is an integral part of the Olympus line of automated and semi-automated ultrasonic testing products. Nondestructive testing (NDT) personnel are able to reduce the time defining the appropriate inspection configuration for OmniScan flaw detectors. This step makes sure that the configuration is compliant with the inspection code, eliminating possible configuration errors.
- Focal law calculator
- Intuitive, simple, and affordable
- 3-D views of parts, wedges, and probes
- Intuitive keyboard shortcuts
- Import/export configuration to the OmniScan MX2 and SX
General Interface
The NDTÂ SetupBuilder software interface is based on two grids: Probe Sets and Groups. The grids are designed to offer quick visualization of probes, wedges, positions, and beam parameters.
Additional interfaces are available for wedge and probe definition and parameter validation.
The wedge menu gives access to wedges available in the Olympus database, plus the details of the model characteristics including length, width, and height. Top, side and end views enable the user to visualize the selected wedge.
Similarly, the probe interface provides access to the available probes and their corresponding parameters in the Olympus database.
NDT supervisors can use PC-based NDTÂ SetupBuilder software to define the inspection technique and set ultrasonic beam parameters for their inspections. Supervisors can define the inspection technique either remotely or on-site, without the need to access an OmniScan. More importantly, following the definition of the inspection technique, the configuration can be imported to the OmniScan MX2 and SX thereby reducing configuration time and manipulation errors prior to the inspection.
OmniPC 4
OmniPC is a PC-based data analysis and reporting software that benefits from the same user interface, analysis and reporting features as the OmniScan.
Analysis
With OmniPC, the OmniScan unit can now be used strictly for scanning while analysis is performed simultaneously on a personal computer. This software can also be used in conjunction with extra-large screens for increased visibility, and with keyboard shortcuts for faster operations.
OmniPC software benefits from the same user interface as the OmniScan software. No need to learn new software for the analysis of your OmniScan data files.
Export C-Scan
OmniPC adds a new feature for corrosion applications. You can export the complete C-Scan values to a *.txt file for further analysis. The values can be visualized in the Notepad, Excel, Matlab or any other software in which you wish to do your analysis.
Perform your acquisition on any OmniScan instrument. |
Export as a .txt file and perform analysis on the software of your choice. |
OmniPC Features
Interface
Ease of Use
|